SD05
STEPPER DRIVER SD05
Driver unit for bipolar stepper motors.
Microstepping control.
Optoisolated, two-way and independent control inputs and outputs.
Easy connection to ALPHA CU4 control unit.
Possibility to connect directly to a PLC.
Functional parameter programming (microstepping, motor phase current, etc.) via PC programming software.
Phase current adjustment.
Position control by means of incremental encoder (programmable position tolerance).
Electronic protection against over temperature, over current and overvoltage/low voltage.
Automatic energy absorption during motor braking.
Possible control of external electromagnetic brake.
Possibility to divert the signals coming from Home/Limit Switch position sensors towards the ALPHA CU4.
Self-diagnosis functions.
Updatable firmware.
| Power supply voltage |
+24/48Vdc |
| Motor driving current |
5A maximum peak - phase current programmable via software |
| Microstepping |
adjustable from 1/1 to 1/10 |
| Control inputs |
Optoisolated, two-way and independent (CLOCK, DIRECTION, BOOST/ADDR, ENABLE TORQUE, FAULT RESET) |
| Input current |
from 1mA to 30mA |
| Input voltage |
from 6V to 24V |
| Control output |
STATUS - optoisolated, two-way and independent |
| Output current |
max 190mA |
| Output voltage |
max 58V |
| Clock frequency |
Max 100kHz |
| Encoder typology |
Incremental, 200CPR, 2X decoding mode |
| Electromagnetic brake |
+24V, 0.5A |
| Wiring |
spring terminals connectors |
| Mounting |
DIN rail standard |
|
|
